1. There is cementation inside the wrong oil feeder, reducing the air circulation rate.
Solution: clean the oil feeder.
2. The oil feeder has no proper function
This situation is usually caused by the wrong installation of the oiler. The installation should follow the direction of the oiler arrow, which specifies the direction of air flow.
3. There are two reasons for excessive lubricating oil in the oil feeder to cause this fault. A. the setting of the oil feeder is not accurate, so the oil mist feeder should be set correctly; B. Excessive amount of lubricating oil is added beyond the marked line. Excess oil should be released
The lubricating oil in the oiler runs out quickly
A. o-ring (27) does not function as a seal and needs to be replaced with a new o-ring; B. the oil feeder should be properly set if it is wrong.
This article reprint. If involve tort please contact us to delete.
